Notifications
Retirer tout

Crop and resize

5 Posts
3 Utilisateurs
0 Likes
1,087 Vu
0
Début du sujet

I have some 5.3k clips and I want to do two things.

1. I want to export corrected clips as 2160p video.

2. I want to crop the occasional clip in a sequence to about 50% and resize it to match the others, in other words, zoom in.

I thought I knew how, but it has defeated me so far!

phylsmith2004 08/06/2024 8:49

@dejay 

@IgorBeg probably has the best answer for this.

4 Réponses
0

@DeJay

What is your Format Project? 2160p -> 3840 x 2160 pixels?

Do you want to resize the 5.3k clips (5312 x 2988) to 2160p, before inserting them in the Timeline?

Do you want to Crop a clip (or more clips) to focus on a detail of the image? When to Crop to 50% and resize to Project Format you may lose a bit of resolution to the image.

0
Début du sujet

Thanks Phyl and Igor.

The answer to the resolution problem came to me overnight when I remembered I had forgotten to attach the Auto Scale effect, I haven't done it for so long!

As to cropping and resizing, the manual says cropping can be keyframed but not how to achieve it. I found a work around by putting clips for resizing on a separate track, fine if only cropping one clip, but add a second clip and the first crop affects it as well, any change to the second clip crop affects the first one too.

I have found a way to achieve what I want using Projector with keyframes rather than Crop. Is that what the manual refers to when it says cropping is keyframable?

Posté par: @igorbeg

Do you want to Crop a clip (or more clips) to focus on a detail of the image? When to Crop to 50% and resize to Project Format you may lose a bit of resolution to the image.

Thanks for the tip, but I know that. I find I am no longer able to carry my HC-X1500 along with travel tripod and other gear in a backpack for any length of time, so I have been experimenting with using a GoPro instead. My Hero 12 shooting 10-bit log in 5.3k, with the addition of GoPro Labs firmware, can give outstanding results with the right settings. To allow a slight lossless zoom, reframing or better so-called macro (with an added lens) when needed, I want to shoot 5k and reduce it to 4k in post. 5.3k has approximately 1.9x the pixels of 4k, so a nearly 50% zoom should do it.

 

 

0

@DeJay
If your clips need to stay close together (one next to the other, with no space between them)
my first suggestion is to use "Crop & Position" and "Scale" plugins (effects) on them.
Steps without keyframes:
1. In an empty Video track (yes is better, but no need), insert your clips in the Timeline.
2. Highlight a clip; you can use Double click on it.
3. Insert the "Crop & Position" plugin first and then the "Scale" plugin. It is important you see in the Timeline, from top to bottom the "Crop & Position" and then the "Scale" effects. The plugins will be inserted in the highlight area only.
4, Repeat from #2 point for the other clips.

When the insertion of the plugins into the Timeline is finished, you can start changing
the effect parameters:
5. Open the "Scale" plugin window to change the scale, using Scale option (No Size option) and checking the "Constrain ratio" check box.
6. Open the "Crop & Position" plugin window to change the Position (X and/or Y). It is better Reset ALL first using the Reset button.

If you want, I could make a little screencast, but not today.

If your clips NO need to stay close together it is possible to use another way, using keyframes on Projector/Camera tools. Later if need.

0
Début du sujet

Thanks Igor

I had worked out how to do it using Projector and keyframes, but taking your suggestions and modifying them for my use is easier

I am only likely to want to rescale the occasional clip in a sequence, although sometimes it could be several, which would make the timeline unwieldy with a staircase of of individually attached effects, so I tried attaching Size and Position and Scale to the timeline when necessary, enabling keyframes and keyframing each adjustment as required. To achieve the desired effect I use Crop and Position first then Rescale.That gives me exactly what I was looking for. Thanks again.

Share: